POLYPLAST SB
Aqueous dispersion of a styrene/butadiene copolymer
Because of its good compatibility, POLYPLAST SB is used in combination with inorganic binders such as cement, lime and gypsum. The addition of POLYPLAST SB improves the processability, wet adhesion and plasticity of fresh mortars. The dispersion has a strongly liquefying action. At the same consistency of the mortar there is a consequent reduction in the water requirement.
As a result of adding POLYPLAST SB, hydraulically setting systems show an mprovement in the following properties:
- flexural strength in tension, up to 50% (DIN 1164)
- adhesive strength
- abrasion resistance
- water resistance
- chemical resistance
- freeze/thaw resistance
- shrink/swell behavior
POLYPLAST SBis used in:
- floor screeds, leveling compounds
- adhesive-bonded joints and sealers/primers
- repair mortars, in particular for the restoration of concrete
- cement based anticorrosion paints
- gypsum-based fillers
- building adhesives
Detailed information on the above indicated applications is available on request.
